Sluice Gate
The Sluice Gate is designed for open channel installation with a highly versatile flow control in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a perfect seal on the gate.
The frame of the Sluice Gate is typically embedded in a concrete channel for both uni directional or bi-directional sealing. Also there are different mounting options such as wall mount and existing channel mount where required.
The Sluice Gate is manufactured in stainless steel which has a higher corrosion and erosion resistance in many applications which results into in a longer life cycle with little or no maintenance. Other materials of construction are available upon request.
sealing Gates at Water & Wastewater Treatment Plants
Sealing gates at water & wastewater treatment plants are equipment for flow control there are several types of these gates like: sluice gate, penstock, stop log
These equipment also apply for many different works like irrigation, power plants, pools
Stop Logs
The Stop Log is a three-side sealing penstock composed of several logs that fit on top of each other in the frame, designed for open channel installations and suitable for different type of applications in the water and wastewater treatment plants, irrigation, dams and reservoirs, etc. By adding or removing logs, the Stop Log allows for channel flow control and are also ideal for maintenance and repair works, as well as for flood control and diversion
• Seating and unseating head pressure of the total height of the logs
• Stainless steel fabricated construction. Different materials available
• No actuator, hand operated with lifting poles or with auxiliary lifting devices available
PENSTOCK
The PENSTOCK is available for both 3-side and 4-side sealing. The channel gate is a three-side sealing penstock designed for open channel installations and suitable for different type of applications in the water and waste water treatment plants, irrigation, dams and reservoirs, etc
The 4 sided sealing penstock apply for tank walls, openings, tubes, etc. The gates are suitable for different types of applications with a highly versatile flow control for waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants
Seating and unseating head pressure of slide height
Stainless steel fabricated construction. Different material available
Rising & non-rising stem configurations available
Manual (handwheel and bevel gear), electric actuation options available
Mounting options: usually embedded in concrete, also face-mounted in existing channel and wall mounted at the end of the channel
Ask us how our equipment can help you and your industry
Contact us at: Phone N.O 00983136516429 Fax: 00983136518981 WhatsApp: 00989103592006
۳ & ۴-sealed Gates- Sanitary Wastewater Treatment Package- Oil Remover- Water Desalination- Sludge Scrapper Bridge
